Art2Silkscreen
Hybrid Mixo Ink All Colours
Hybrid Mixo Ink All Colours
Couldn't load pickup availability
Try it, you will love it!
-
Easy to use. Stays wet on the screen for days meaning no clogging and blocking the mesh after minutes like most waterbased inks
-
Available in 250ml, 500ml, 1 Litre, 5 Litre containers
-
Brilliant results for both lower and higher mesh counts. Even on the highest 100-120T meshes, you will find this ink is one of the easiest to use even if you are a novice, you will achieve a soft sublimation feel to the finish.
-
Water washable.
-
Cures at a temperature of 185°C. Flash dry at 10 seconds or to fully cure between 20-60 seconds, depending on colour.
-
Low Viscosity, low tack lightweight ink, less fatigue when printing.
-
Print Wet on wet.
-
Heat fix using just a domestic iron for 3 minutes at cotton temperature.
-
Iron directly over the print without smudging.
-
Solvent and Phthalate free.
-
Wash down using water and drain safe organic screenwash.
-
No need for dip tanks or strong chemicals. No odour!
-
Print onto textiles, un-coated paper, board and wood.
-
Recommended for use with One Coat Emulsion or Saati PHU Emulsion.
Share
