Hand Cut Stencil Kit

Ideal for artists, students, small projects, paper/card printing, fabric printing.

Print onto fabric using waterbased ink and Iron fix.
Also print onto paper, board and wood with this air dry ink.

Included in this kit:

• 1 x Baseboard
• 2 x Aluminium zinc plated Clamp to hold your screen
• 2 Aluminium Screens 43T mesh, 20"x24"
• 1 x 12" Inch Squeegee with blade
• 10 x A4 Sheet of stencil cut film to hand draw or print your image onto from your PC. Then you cut out your image using a craft knife. This sticks to your screen.
• 4 X 155ml of Waterbased ink. Iron Fix. BLACK, RED, WHITE, BLUE.
• 10 Mixing Sticks to mix your colours
• 1 Roll of tape
• 1 CRAFT KNIFE

VERY SIMPLE INSTRUCTIONS OF HOW TO USE THIS KIT:

1. DRAW OR USING AN INKJET PRINTER. APPLY YOUR DESIGN ON TO THE WATERPROOF SELF ADHESIVE STENCIL PAPER.

2. CUT OUT YOUR DESIGN USING THE CRAFT KNIFE.

3.PEEL BACK THE BACKING PAPER FROM THE STENCIL PAPER AND STICK IT TO THE SCREEN.

4. PLACE THE WATERBASED INK ON THE SCREEN

5. USE THE SQUEEGEE TO SQUEEZE THE INK THROUGH THE IMAGE ONTO THE T.SHIRT.

6.LIFT THE SCREEN AWAY, DRY YOUR PRINT WITH A HAIRDRYER, THEN IRON WITH A HOT IRON .

7.FOR MULTIPLE PRINT RUNS ITS ADVISABLE TO MASK AROUND THE INSIDE OF THE SCREEN ESPECIALLY IN THE CORNERS, AND ALWAYS FLOOD THE SCREEN BETWEEN EACH PRINT, THIS WILL PREVENT THE INK ON THE SCREEN DRYING.

8. WHEN THE PRINT IS FINISHED ,PEEL OFF THE STENCIL PAPER AND WASH THE SCREEN CLEAN WITH WATER, DRY IT AND ITS READY FOR ANOTHER DESIGN