1 colour press assembly infos
1. SCREW THE SQUARE POLE BASE ON THE BASE BOARD 1” IN FROM THE NARROW EDGE ALONG THE CENTRE LINE
2. SLOT SQUARE TUBE INTO SQUARE POLE BASE
3. PLACE PRINTIG BOARD ON TO BASE BOARD
4. SLIDE CLAMP DOWN SQUARE TUBE POLE AND AND TIGHTEN CLAMP ON POLE WHEN THE BOTTOM FRONT
JAW WHICH IS OPEN AT 30MM, IS LEVEL WITH THE PRINTING BOARD.
5. PLACE YOUR SCREEN IN THE OPEN JAW AND TIGHTEN CLAMP, READJUST YOUR CLAMP ON THE POLE
MAKING SURE YOUR SCREEN IS FLAT ON THE PRINTING BOARD.
6 RAISE YOUR SCREEN UP AND TIGHTEN THE BALL LEVER TO SUPPORT YOUR SCREEN
NOW PLEASE WATCH THE VIDEO ON HOW TO PRINT YOUR T SHIRTS.
